POWER SUPPLY INTERFACE BACKPLANE DUAL 4626-12
DESCRIPTION :
Power Interface Specification : PICMG 2.11 Rev 1.0
Input Power : AC or DC (3-Pin AMP Mate-N-Lok
     Connector)
DC Output Voltages : +5V, +3.3V, +12V, -12V

Voltage Output Options :
  • Dual 20-pin ATX Connectors
  • Screw Terminals (Power Bugs) for higher current requirements

Local or Remote Voltage sensing option

Geographical address headers for each power supply
Backplane Size : 3U (5.067") High X 16HP (3.144") Wide
View Datasheet
4626-12 FRONT
4626-12 FRONT
(click on image to enlarge)
4626-12 REAR
4626-12 REAR
(click on image to enlarge)
POWER SUPPLY INTERFACE BACKPLANE SINGLE 4626-11
DESCRIPTION :
Power Interface Specification : PICMG 2.11 Rev 1.0
Input Power : AC or DC (3-Pin Mate-N-Lok Connector)
DC Output Voltages : +5V, +3.3V, +12V, -12V

Voltage Output Options :
  • Single 20-pin ATX Connector
  • Screw Terminals (Power Bugs) for higher current requirements

Local or Remote Voltage sensing option

Geographical address headers for power supply
Backplane Size : 3U (5.067") High X 8HP (1.544") Wide
View Datasheet
4626-11 FRONT
4626-11 FRONT
 (click on image to enlarge)
4626-11 REAR
4626-11 REAR
 (click on image to enlarge)
POWER SUPPLY INTERFACE BACKPLANE TRIPLE 4626-14
DESCRIPTION :
Power Interface Specification : PICMG 2.11 Rev 1.0
Input Power : AC or DC (3-Pin Mate-N-Lok Connector)
DC Output Voltages : +5V, +3.3V, +12V, -12V

Voltage Output Options :
  • Three 20-pin ATX Connectors
  • Screw Terminals (Power Bugs) for higher current requirements

Local or Remote Voltage sensing option

Geographical address headers for power supply
Backplane Size : 3U (5.067") High X 24HP (4.744") Wide
View Datasheet
4626-14 FRONT
4626-14 FRONT
 (click on image to enlarge)
4626-14 REAR
4626-14 REAR
 (click on image to enlarge)
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: (818) 985 8208, (800) 423 5659; Fax : (818) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PICMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved