INBORD PINS .... PART NO. : K24, K30, K31, K36 SERIES
Inbord Pins for Hole Dia. : 0.025" & 0.042"
 
Press-in pins provided excellent solder points
Uses pin installation tools: P133A available separately
Available in several sizes and Tin or Gold plated
 
Tin Plated Inbord Pins
K24C         K30C        K31C         K36C
 

Gold Plated Inbord Pins

K24A         K30A
Ordering Table :
 
Part No.         Pkg. Qty.      Hole Size             A                 B               C                 D                 E                 F
K24A/C       100          0.042"      0.650"    0.255"    0.375"    0.073"    0.080"    0.039"
K24A/M     1000          0.042"      0.650"    0.255"    0.375"    0.073"    0.080"    0.039"
K24C/C       100          0.042"      0.650"    0.255"    0.375"    0.073"    0.080"    0.039"
K24C/M     1000          0.042"      0.650"    0.255"    0.375"    0.073"    0.080"    0.039"
K30C/C       100          0.042"      0.550"    0.255"    0.305"    0.085"    0.060"    0.040"
K30C/M     1000          0.042"      0.550"    0.255"    0.305"    0.085"    0.060"    0.040"
K31C/C       100          0.042"      0.375"    0.160"    0.195"    0.075"    0.060"    0.040"
K31C/M     1000          0.042"      0.375"    0.160"    0.195"    0.075"    0.060"    0.040"
K36C/C       100          0.025"      0.705"    0.293"    0.400"    0.040"    0.050"    0.023"
K36C/M     1000          0.025"      0.705"    0.293"    0.400"    0.040"    0.050"    0.023"
 
Note: K24 series pins use in G-10 epoxy glass board only as knurled shoulder may split CEM-1 composite material
 
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax : ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI
® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved