SOCKET PINS for 0.042" & 0.055" Dia. HOLES
 
VECTOR PART SERIES : R30, R31, R32, R50, R51, R52, R53
 
0.042" Dia. Holes : R32 Series
Low profile wire-wrap socket pins
Pressfit mounting with 3 Level wire wrap on 0.025" square posts
Four-finger contacts, tapered sockets for easy insertion
Accepts 0.015 - 0.025 diameter leads
Gold-plated contact surfaces ( 30 micro inch Gold over Nickel )
Gold finish shell ( 10 micro inch Gold over Nickel )
Male pin depth : 0.13"
Use P158 Insertion Tool with D9 Die Point.
Ordering Table
Part No.
Pkg. Qty.
  100
1000
 
0.055" Dia. Holes : R31 Series
Low profile wire-wrap socket pins
Pressfit mounting with 3 Level wire wrap on 0.025" square posts
Four-finger contacts, tapered sockets for easy insertion
Gold-plated contact surfaces ( 30 micro inch Gold over Nickel )
Gold finish shell ( 10 micro inch Gold over Nickel )
Male pin depth : 0.17"
Use P158 Insertion Tool with D10 Die Point.
Ordering Table
Part No.
Pkg. Qty.
  100
1000
 
0.055" Dia. Holes : R30 Series
Low profile, pressfit pins for hand or dip solder applications
Solder post extends 0.19 below and 0.030 above board surface
Four-finger contacts, tapered sockets for easy insertion
Gold-plated contact surfaces ( 30 micro inch Gold over Nickel )
Gold finish shell ( 10 micro inch Gold over Nickel )
Male pin depth : 0.17"
Use P158 Insertion Tool with D10 Die Point.
Ordering Table
Part No.
Pkg. Qty.
  100
1000
 
0.055" Dia. Holes : R52 & R53 Series
Low profile wire-wrap socket pins
Gold-plated contact surfaces ( 30 micro inch Gold over Nickel )
Tin/Lead finish shell ( 200 micro inch Tin/Lead over Nickel )
3 Level wire wrap on 0.025" sauare posts
Use P158 Insertion Tool with D10 Die Point.
R52 : Four fingure contacts, 3 level wire wrap on 0.025" square posts
R53 : Six fingure contacts, 3 level wire wrap on 0.025" sauare posts
Ordering Table
Part No.
Pkg. Qty.
  100
1000
  100
1000
 
0.055" Dia. Holes : R50 & R51 Series
Low profile wire-wrap socket pins
Gold-plated contact surfaces ( 30 micro inch Gold over Nickel )
Tin/Lead finish shell ( 200 micro inch Tin/Lead over Nickel )
2 Level wire wrap on 0.025" sauare posts
Use P158 Insertion Tool with D10 Die Point.
R52 : Four fingure contacts, 2 level wire wrap on 0.025" square posts
R53 : Six fingure contacts, 2 level wire wrap on 0.025" sauare posts
Ordering Table
Part No.
Pkg. Qty.
  100
1000
  100
1000
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax : ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI
® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved