VECTORBORD® CIRCBORDTM .... PART NO. : 8003
Description :
4.5" x 6.50", Hole Dia.: 0.042", Grid: 0.100" x 0.100"
Pad-Per-Hole & Ground Plane
0.085” Square solder pad etched around each hole on wiring side
Accommodates any type DIP IC device or discrete component
Single sided board with pads and peripheral GND plane on one side only.
No etch or plating on reverse side
Circuit Pattern :
Pad-Per-Hole Square Pads
Contacts :
N/A
16 Pin DIP Capacity :
60
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" x 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
4.50" x 6.50" x 0.062"
Material :
CEM-1
Wire-Wrap Terminals :
T44, T46, T49, T68
Solder Terminals :
T42-1
Wire-Wrap Socket Pins :
R32
NEMA Grade : CEM-1
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA - 91605, USA
Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708

Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI
® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved

webmaster@vectorelect.com