VECTORBORD®PLUGBORDTM PART NO. : 3677-2
 
Description :
4.5" X 6.5" X 0.062, Hole Dia.: 0.042", Grid: 0.100" X 0.100"
3-Hole Solder Pads ( 0.28” x 0.080” ) for interconnecting multiple component leads
Holes are not plated-thru.
Voltage/ground buses interleaved between pad areas on wiring side
Test point area with solder pads around holes, provided along back edge of board
Unclad test point area at top of board
Row and column legends provided
Layout paper and instructions included
   
Circuit Pattern :
3-Hole Solder Pad 1 side only
Contacts :
22/44 @ 0.156" Centers Ni / Gold
16 Pin DIP Capacity :
12
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" X 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
4.5" X 6.5" X 0.062"
Material :
FR-4
Wire-Wrap Terminals :
T44, T46, T49 & T68
Solder Connector :
R644
Wire-Wrap Socket Pins :
R32
Wire-Wrap Connector :
R644-3
Extender : 3690
Recommended Card Cage: CCK 13 Series Card Cage { Subracks }
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA - 91605, USA
Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708

Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved
webmaster@vectorelect.com