VECTORBORD®PLUGBORDTM PART NO. : 4112-5

Description :

4.5" X 4.5" X 0.062, Hole Dia.: 0.042", Grid: 0.100" X 0.100"
Ground Plane / 3-Hole Solder Pad with Zig-Zag Buses
3-hole solder pattern on wiring side
Overall ground plane on component
0.085” diameter clearance around holes
3-hole solder pads ( 0.28” x 0.080” ) for interconnecting multiple component leads
Wire-wrap pins to ground planes uses Vector T124 solder washers ( T124 available separately )
Layout paper and instructions included
   
Circuit Pattern :
Zig-Zag Buses
Contacts :
22/44 @ 0.156" Centers Ni / Gold
16 Pin DIP Capacity :
8
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" X 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
4.5" X 4.5" X 0.062"
Material :
CEM-1
Wire-Wrap Terminals :
T44, T46, T49 & T68
Solder Connector :
R644
Wire-Wrap Socket Pins :
R32
Wire-Wrap Connector :
R644-3
Extender : 3690
Recommended Card Cage: CCK 13 Series Card Cage { Subracks }
NEMA Grade : FR-4
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA - 91605, USA
Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708

Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved
webmaster@vectorelect.com