VECTORBORD®PLUGBORDTM PART NO. : 4112
Description :
4.5" X 9.6" X 0.062, Hole Dia.: 0.042", Grid: 0.100" X 0.100"
3-hole solder pads ( 0.28” x 0.080” ) for interconnecting multiple component leads
Zig-Zag Bus Pattern on wiring side
Zig-Zag Bus Pattern provides access to voltage or ground at alternating hole positions
Continuous ground plane on component side with 0.085” etched clearance area around hole
Row and column legends provided
Layout paper and instructions included
   
Circuit Pattern :
3-Hole Solder Pad
Contacts :
22/44 @ 0.156" Centers Ni / Gold
16 Pin DIP Capacity :
40
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" X 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
4.5" X 9.6" X 0.062"
Material :
FR4 Epoxy Glass { MIL - P13949 type Gf }
Wire-Wrap Terminals :
T44, T46, T49 & T68
Solder Connector :
R644
Wire-Wrap Socket Pins :
R32
Wire-Wrap Connector :
R644-3
Extender : 3690-6
Recommended Card Cage: CCK 13 Series Card Cage { Subracks }
NEMA Grade : FR4
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA - 91605, USA
Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708

Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved
webmaster@vectorelect.com