3U EUROCARD PLUGBORDTM ....... PART NO. : 4614-3
Description :
3U x 160mm, Hole Dia.: 0.042", Grid: 0.100" x 0.100"
Pad-Per-Hole
Voltage and ground buses around board perimeter on both sides
For solder, Wire-Wrap or mixed wiring methods
Pad and bus surfaces solder-coated for user convenience
Plated-thru holes
Row and column legends pro-vided
Layout paper and instructions included
   
Circuit Pattern :
Pad-Per-Hole
16 Pin DIP Capacity :
30
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" x 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
3.94" x 6.30" x 0.062" -----> { 3U x 160mm }
Material :
FR4 Epoxy Glass { MIL - P13949 type Gf }
Wire-Wrap Terminals :
T44, T46, T49 & T68
96 Pin DIN Connector :
RE96MWR { Available Seperately}
Wire-Wrap Socket Pins :
R32
Recommended Card Cage: CCK160-3U Series Card Cage { Subracks }
NEMA Grade : FR4
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA - 91605, USA
Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708

Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved
webmaster@vectorelect.com