VECTORBORD® PLUGBORDTM ....Part No. : 8018
Description :
100 mm x 160 mm, Hole Dia.: 0.6 mm, Grid: 2 mm x 2 mm
Pad-Per-Hole. 2mm Grid Pattern : Q & P
Combination Pattern: half 2mm grid & half 0.1” grid
Dual copper rows in middle for Vcc/Gnd use
Eurocard size: 100mm x 160mm
100mm height accepts cPCI 2 mm J1 (25 row) & J2 (22 row) connectors on edge
Plated Thru Holes with annular ring
Pads on both sides J2 (22 rows) J1 (25 rows)
   
Circuit Pattern :
Pad-Per-Hole & 2mm, Grid Pattern : " Q & P " pattern
Contacts :
N/A
Hole Diameter :
0.6 mm +/- 0.005 { 0.025" +/- 0.002} & 0.042"
Grid : 2 mm x 2 mm & 0.100 x 0.100 { Combo 0.1" & 2 mm }
Dimension { H, W, T } :
100 mm x 160 mm x 1.575 mm { 3.94" x 6.30" x 0.062" }
Material :
FR4 Epoxy Glass { MIL - P13949 type Gf }
Inbord Pin :
0.025" Dia., K36 , 0.042" Dia., K24
Socket Pin :
0.042" Only, R32
J1 Connector : 8018J1
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax : ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved