VECTORBORD® PLUGBORDTM ....Part No. : 8020
Description :
3U x 160 mm, Hole Dia.: 0.025" , Grid: 1 mm x 1 mm
New “S” Pattern accommodates all metric component lead spacing
3U x 160mm Eurocard size
2mm Connectors can be Press-fit into board end.
Copper plated-thru holes (no solder plating)
Peripheral ground plane
Low cost Vectorbord ® model for universal use
Constructed of 1/16” ( 0.062” ) FR-4
cPCI 25 row & 22 row 2 mm connectors can be press-fit.
   
Circuit Pattern :
Peripheral Ground Plane, 1 mm Grid Pattern
Contacts :
N/A
Hole Diameter :
0.025" Dia. Copper Plated Thru holes with annular ring around each hole
Grid : 1 mm x 1 mm
Dimension { H, W, T } :
3U x 160 mm x 1.575 mm { 3.94" x 6.30" x 0.062" }
Material :
FR4 Epoxy Glass { MIL - P13949 type Gf }
Solder Terminals :
0.025" Dia. K36
Wire-Wrap Connector :
cPCI 25 row & 22 row J1 Order 8020J1
NEMA Grade : FR4
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax : ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved