VECTORBORD®PLUGBORDTM PART NO. : 8024
Description :
100 mm X 160 mm, Hole Dia. : 0.6 mm, Grid : 2mm X 2 mm
3 hole solder pads, both sides, plated-thru holes 2mm Grid Hole Pattern : Q
P100 mm height accepts cPCI 2mm J1 (25row) & J2 (22row) connectors on edge
Plated thru holes with annular ring
vector Pads on both sides
   
Circuit Pattern :
3-hole solder pads, both sides, plated-thru holes 2mm Grid Hole Pattern Q
Contacts : N/A
Hole Diameter :
0.6 mm +/- 0.05 { 0.025" +/- 0.002 }
Grid : 2 mm X 2 mm Grid Hole Pattern
Dimension { H, W, T } :
100 mm X 160 mm X 1.575 mm { 3.94" X 6.30" X 0.062" }
Material :
FR4 Epoxy Glass { MIL - P13949 type Gf }
Inbord Pin :
K36
J1 Connector :
ORDER 8024J1
UL Flammability Class :
94V - 0
   
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax : ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved