VECTORBORD® PLUGBORDTM ..... PART NO. : 8804
Description :
10.0" X 5.3" X 0.062, Hole Dia.: 0.042", Grid: 0.100" X 0.100"
Voltage/Ground Plane.
Zig-Zag buses: pins, terminals or wire contact either voltage or ground at each hole along bus lines.
I/O mounting area for ribbon cable header
0.042” plated-thru holes on 0.1” grid
Layout paper and instructions included
Row and column legends provided
S-100 Form Factor
   
Circuit Pattern :
Voltage/Ground Plane Contacts
Contacts :
50/100 @ 0.125" Centers Ni/Gold
16 Pin DIP Capacity :
80
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" X 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
10.0" X 5.3" X 0.062"
Material :
FR4 Epoxy Glass { MIL - P13949 type Gf }
Wire-Wrap Terminals :
T44, T46, T49, T68
Solder Connector :
R681-3
Wire-Wrap Socket Pins :
R32
Wire-Wrap Connector :
R681-2
Extender : 3690-12
Recommended Card Cage: CCK 100 Series Card Cage { Subracks }
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax : ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved