3U EUROCARD PLUGBORDTM ....... PART NO. : E160-3U-2
Description :
3U x 160 mm, Hole Dia.: 0.042", Grid: 0.100" x 0.100"
Peripheral Buses
Voltage and ground buses around board perimeter on both sides.
0.080" dia. Isolated solder pad around each hole on both sides
Accepts PGA's and PLCC's
Pad and bus surfaces solder-coated for user convenience
For solder, Wire-Wrap or mixed wiring methods
29 x 41 hole grid unrestricted component placement area.
Layout paper and instructions included
Row and column legends provided
   
Circuit Pattern :
Peripheral Buses
16 Pin DIP Capacity :
35
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" x 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
3.94" x 6.30" x 0.062"
Material :
FR4 Epoxy Glass { MIL - P13949 type Gf }
Wire-Wrap Terminals :
T44, T46, T49, T68
96 Pin DIN Connector :
RE96MWR (available separately)
Wire-Wrap Socket Pins :
R32
Recommended Card Cage: CCK 160-3U Series Card Cage { Subracks }
NEMA Grade : FR4
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA - 91605, USA
Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708

Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved
webmaster@vectorelect.com