6U EUROCARD PLUGBORDTM ....... PART NO. : E220-6U-2
Description :
6U x 220 mm, Hole Dia.: 0.042", Grid: 0.100" x 0.100"
Peripheral Buses
Voltage and ground buses around board perimeter on both sides.
Accepts PGA's and PLCC's
Bus surfaces solder-coated for user convenience
For solder, Wire-Wrap or mixed wiring methods
58 x 78 hole grid unrestricted component placement area.
Layout paper and instructions included
Row and column legends provided
   
Circuit Pattern :
Peripheral Buses
16 Pin DIP Capacity :
140
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" x 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
9.19" x 8.66" x 0.062"
Material :
FR4 Epoxy Glass { MIL - P13949 type Gf }
Wire-Wrap Terminals :
T44, T46, T49, T68
96 Pin DIN Connector :
RE96MWR (available separately)
Wire-Wrap Socket Pins :
R32
Recommended Card Cage: CCK 220-6U Series Card Cage { Subracks }
NEMA Grade : FR4
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA - 91605, USA
Tel: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax: ( 818 ) 985 7708

Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved
webmaster@vectorelect.com