Vectorbord® UNCLAD / COPPER CLAD PUNCHBOARDS
Introduction : Vectorbord® is one of the trusted and time honored trademarks in the Electronics Industry. It provides timely solutions to prototype, first article, testing, maintenance and repair operations. Vectorbord® in a broader context, symbolizes parts needed to begin, develop and finish a prototype or “breadboard ".
Board Pattern & Materials : Vectorbord® available in several hole patterns (see below). Materials available are  FR-4 epoxy glass, CEM-1 epoxy glass composite,   FR-2 Phenolic/paper. Many boards available with 1oz. copper clad 1 oz. on one side or both sides
Our ‘X’ pattern is our designator for NO HOLE PATTERN, AND IS FR-4 or CEM-1 slabs cut to 12.0” X 12.0”. Check with factory for other sizes.

See our new Hi-Temp VT461, FR-4 with a high Tg of 200°C (Part Nos.169P84HT, 169P84HTC2, 64P44HT)

We offer a complete line of accessories including eyelets, pins, push-in (solderable or solderless) and Wire-Wrap terminals, connectors, wires and tools.

Vector

Vector

 

 

 

FR4 Epoxy Glass ... Unclad Punchbord
0.025" Hole Dia. ....Pattern " Q " ... Grid: 2 mm x 2 mm
Part Number Dimension .........{ W x L x 0.062" thick }
47Q78WE 100 mm W x 160 mm L
0.025" Hole Dia. ....Pattern " M " ... Grid: 0.05" x 0.05"
Part Number Dimension .........{ W x L x 0.037" thick }
126M76-032 : 4.0" W x 6.5" L ( 101.6 mm x 165.1 mm )
336M76-032 : 4.0" W x 17" L ( 101.6 mm x 431.8 mm )
0.042" Hole Dia. ....Pattern " P " ... Grid: 0.10" x 0.10"
Part Number Dimension .........{ W x L x 0.031" thick }
59P44-032 : 4.5" W x 6.0" L ( 114.3mm x 152.4mm )
169P59-032 : 6.0" W x 17" L ( 152.4 mm x 431.8 mm )
169P59-047 : 6.0" W x 17" L ( 152.4 mm x 431.8 mm ) ...0.047" thick
0.042" Hole Dia. ....Pattern " P " ... Grid: 0.10" x 0.10"
Part Number Dimension .........{ W x L x 0.062" thick }
64P44WE : 4.5" W x 6.5" L ( 114.3mm x 165.1mm )
84P44WE : 4.5" W x 8.5" L ( 114.3 x 215.9mm )
169P44WE : 4.5" W x 17" L ( 114.3 mm x 431.8 mm )
169P79WE : 8.0" W x 17" L ( 203.2 mm x 431.8 mm )
169P84WE : 8.5" W x 17" L ( 215.9 mm x 431.8 mm )
169P84HT : 8.5" W x 17" L ( 215.9 mm x 431.8 mm )
169P84HTC2 : 8.5" W x 17" L ( 215.9 mm x 431.8 mm )
64P44HT : 4.5" W x 6.5 " L ( 114.3 mm x 165.1 mm )
32P15WE : 3.3" W x 1.6 " L ( 84 mm x 40 mm )
0.062" Hole Dia. ....Pattern " H " ... Grid: 0.10" x 0.10"
Part Number Dimension .........{ W x L x 0.062" thick }
85H48WE : 4.8" W x 8.5" L ( 121.9 mm x 215.9 mm )
170H48WE : 4.8" W x 17" L ( 121.9 mm x 431.8 mm )
85H85WE : 8.5" W x 8.5" L ( 215.9 mm x 215.9 mm )
170H85WE : 8.5" W x 17" L ( 215.9 mm x 431.8 mm )
155H175WE : 16" W x 18" L ( 406.4 mm x 457.2 mm )
170H48WE-032 : 4.8" W x 17" L ( 121.9 mm x 431.8 mm )
0.062" Hole Dia. ....Pattern "G" ... Grid: 0.10" x 0.20"
Part Number Dimension .........{ W x L x 0.062" thick }
85G42WE : 8.5" W x 17.0" L ( 215.9 mm x 431.8 mm )
0.067" Hole Dia. ....Pattern "T" ... Grid: 0.156" x 0.156"
Part Number Dimension .........{ W x L x 0.062" thick }
17T36WE : 3.0" W x 6.0" L ( 76.2 mm x 152.4 mm )
 
FR4 Epoxy Glass/CEM-1 ... Punchbord.....No Holes
Copper-Clad 1 Side ....0.062" thick
12X12C1 : 12" W x 12 " L ( 304.8 mm x 304.8 mm ) .....CEM-1
12X12WEC1 : 12" W x 12 " L ( 304.8 mm x 304.8 mm ) ........FR-4
 
Copper-Clad 2 Side ....0.062" thick
12X12C2 : 12" W x 12 " L ( 304.8 mm x 304.8 mm ) .....CEM-1
 
UNClAD ....0.062" thick
12X12WE : 12" W x 12 " L ( 304.8 mm x 304.8 mm ) ........FR-4
 
 
FR4 with One Side 1 oz. Copper Clad ... Punchbord
0.025" Hole Dia. ....Pattern " M " ... Grid: 0.05" x 0.05"
Part Number Dimension .........{ W x L x 0.037" thick }
336M76-032C1 : 4.0" W x 17" L ( 101.6 mm x 431.8 mm )
0.042" Hole Dia. ....Pattern " P " ... Grid: 0.10" x 0.10"
Part Number Dimension .........{ W x L x 0.062" thick }
169P44WEC1 : 4.5" W x 17" L ( 114.3 mm x 431.8 mm )
169P84WEC1 : 8.5" W x 17" L ( 215.9 mm x 431.8 mm )
169P44WEC2 : 4.5" W x 17" L ( 114.3 mm x 431.8 mm )
CEM-1 with Two Side 1 oz. Copper Clad ... Punchbord
0.042" Hole Dia. ....Pattern " P " ... Grid: 0.10" x 0.10"
Part Number Dimension .........{ W x L x 0.062" thick }
169P44C2 : 4.5" W x 17" L ( 114.3 mm x 431.8 mm )
CEM-1 with Two Side 1 oz. Copper Clad ... No Holes board
Part Number Dimension .........{ W x L x 0.062" thick }
12X12C2 : 12" W x 12" L ( 304.8 mm x 304.8 mm )
CEM-1 with One Side 1 oz. Copper Clad ... Punchbord
0.042" Hole Dia. ....Pattern " P " ... Grid: 0.10" x 0.10"
Part Number Dimension .........{ W x L x 0.062" thick }
169P44C1 : 4.5" W x 17" L ( 114.3 mm x 431.8 mm )
169P59C1 : 6.0" W x 17" L ( 152.4 mm x 431.8 mm )
169P84C1 : 8.5" W x 17" L ( 215.9 mm x 431.8 mm )
CEM-1 Epoxy Glass Composite ... Unclad Punchbord
0.042" Hole Dia. ....Pattern " P " ... Grid: 0.10" x 0.10"
Part Number Dimension .........{ W x L x 0.062" thick }
64P44 : 4.5" W x 6.5" L ( 114.3mm x 165.1mm )
84P44 : 4.5" W x 8.5" L ( 114.3 x 215.9mm )
169P44 : 4.5" W x 17" L ( 114.3 mm x 431.8 mm )
169P79 : 8.0" W x 17" L ( 203.2 mm x 431.8 mm )
169P84 : 8.5" W x 17" L ( 215.9 mm x 431.8 mm )
169P99 : 10.0" W x 17" L ( 254.0 mm x 431.8 mm )
349P84 : 8.5" W x 35" L ( 215.9 mm x 889.0 mm )
169P99WE : 10.0" W x 17 " L ( 254.0 mm x 431.8 mm )
FR2 Phenolic ... Unclad Punchbord
0.042" Hole Dia. ....Pattern " P " ... Grid: 0.10" x 0.10"
Part Number Dimension .........{ W x L x 0.062" thick }
64P44XXXP : 4.5" W x 6.5" L ( 114.3 mm x 165.1mm )
169P44XXXP : 4.5" W x 17" L ( 114.3 mm x 431.8 mm )
169P59XXXP : 6.0" W x 17" L ( 152.4 mm x 431.8 mm )
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax : ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI
® is a registered trademark of PICMG. © 2011 Vector Electronics & Technology, Inc. - All Rights Reserved