Specifications
Ordering Info
• 3U x 160mm Eurocard size for 96-pin DIN connector.
• Pad-Per-Hole both sides
• Voltage and ground buses around board perimeter on both sides
• Press-fit dual-pole terminal blocks accepts 14-20 AWG wire.
• Pushbutton release for each pole.
• Terminal block leads extend 1/8" below bord.
• Available in 2-pole to 16-pole
Part Number | Mounted on Euroblock Protoboard |
---|---|
4614-5-02 | Single dual pole |
4614-5-04 | Two dual pole |
4614-5-06 | Three dual pole |
4614-5-08 | Four dual pole |
4614-5-10 | Five dual pole |
4614-5-12 | Six dual pole |
4614-5-14 | Seven dual pole |
4614-5-16 | Eight dual pole |
Description
Dimensions (H x W x Thick) | 3.94" x 6.30" x 0.062" (100mm x 160mm x 1.57mm) |
Hole Diameter | 0.042" (1.067mm) Plated Thru |
Grid | 0.100" x 0.100" (2.54mm x 2.54mm) |
Circuit Pattern | Pad per hole and Voltage, GND buses - both sides |
Material | FR4 |
UL Flammability Class | 94V-0 |
16 Pin DIP Capacity | 30 |
Wire-Wrap Terminals | T44, T46, T49, T68 |
Wire-Wrap Socket Pins | R32 |
Wire-Wrap Connector | RE96MWR |