L-bracket kit for FP type front panels can also be ordered separately. L-brackets to mount top of 3U panels or optional center position of 6U or 9U high panels.
|CM04||4HP Nylon handle pair|
|CM08||8HP Nylon handle pair |
Contact firstname.lastname@example.org for your custom panel width and/or height.
Small Captive sleeves and screws are included with all front panels and are also sold separately.
Hardware kit P/N : HD99-1. Each HD99-1 kit includes following items
|Retainer Sleeve, Small, Plastic, Black, P/N : 94300002||48|
|Captive Screw, M2.5-0.45 x 11mm long, P/N : 95000002B||48|
CM04 and CM08 Fixed Handle kit without front panels
|HD102||L-bracket pair with front panel screws|
|CM05||L-bracket pair without front panel screws|
|CM05/100||Same as CM05 but pack of 100 L-brackets|
Fixed nylon handles for FP type front panels can also be ordered separately without front panels.
Front panels with Fixed knob type cantilever handles provide mechanical assistance for inserting and removing PCBs using human applied forces. Panels are manufactured from 2.5mm thick aluminum sheet with a vertical grain and a conductive finish.
Each Fixed handle type Front panel kit includes panel, upper and lower handles (lower only on 3U versions) that extend across full width of panel and mounting hardware.
HD99-1 Hardware Kit
HD102 and CM05 L-bracket kit
■ I/O connector cutouts
■ Powder coating
|FP04-3U||3U X 4HP||5.06"||0.788"|
|FP08-3U||3U X 8HP||5.06"|
|FP12-3U||3U X 12HP||5.06"||2.388"|
|FP04-6U||6U X 4HP||10.31"||0.788"|
|FP08-6U||6U X 8HP||10.31"||1.588"|
|FP12-6U||6U X 12HP||10.31"||2.388"|
|FP04-9U||9U X 4HP||15.56"||0.788"|
|FP08-9U||9U X 8HP||15.56"||1.588"|
|FP12-9U||9U X 12HP||15.56"||2.388"|
■ Industry standard IEEE 1101.1 compliant
■ Applications : VME, VXI
■ Manual insertion/extraction of Plug-in PCB
■ Panel material : Aluminum sheet, 6061-T6
■ Finish : Brushed with clear chem film, MIL-C-5541