6U
78 = 160mm; 9.75"
79 = 160mm; 11.15"
80 = 220mm; 12.00"
81 = 280mm; 15.00"
82 = 340mm; 18.00"
83 = 400mm; 20.00"
Model Numbers
CCA = Assembled
CCK = Unassembled Kit
▬
IEEE 1101.10 Type Front Horizontal Extrusion with 10mm extended lip
■ Subrack to accommodate custom card height or depth
■ Subrack to accommodate 80mm Rear Transition Modules
■ Wall mount or Rear cards entry subrack
■ Height dividers for mixed card sizes
■ Subrack with backplanes and plug-in power supplies installed
■ Integrated fan cooling
Inside Width (Does not includes Flanges)
36 = 36HP (7.4" rail length)
44 = 44HP (9.0" rail length)
64 = 64HP (13.0" rail length)
84 = 84HP (17.0" rail length)
9U
90 = 160mm; 9.75"
91 = 160mm; 11.15"
92 = 220mm; 12.00"
93 = 280mm; 15.00"
94 = 340mm; 18.00"
95 = 400mm; 20.00"
Note : mm Dimension indicates subrack is set to accept noted mm depth cards and inches dimension is overall subrack depth
XX
6U
66 = 160mm; 9.75"
67 = 160mm; 11.15"
68 = 220mm; 12.00"
69 = 280mm; 15.00"
70 = 340mm; 18.00"
71 = 400mm; 20.00"
6U Subrack
3U Subrack
Custom Options
XX
■ IEEE 1101.10/11 and IEC60297 compliant
■ Heavy duty extrusion rails, side panels and rack flanges
■ 3U, 6U and 9U heights
■ Rack mountable per ANSI/EIA-310-D
■ EMC requirements and have conductive connections of all metal
components
■ Sold in fully assembled or in kit form
CCX
Subrack Features
XX
▬
Downloads
Ordering Info for IEEE 1101.10 style subracks
Accessories
IEEE 1101.1 Type Front Horizontal Extrusion with 2.5mm short lip
▬
XX
VectorPak™ EMC Rugged subracks for heavy duty applications where a high resistance to shock and vibration is required. Its features include heavy two-screw fixing extrusions, 2.5mm thick side panels / rack flanges and conductive finish throughout.
Subracks accepts standard Eurocards in 3U, 6U and 9U heights and depths up to 400mm in both IEEE 1101.10/11 and IEC60297 standards. This makes the subracks suitable for housing popular backplane types such as VME, VXI, VME64x, VPX, VXS, compactPCI, PXI and also DIN connectors with the use of a connector mounting plates.
▬
Covers/Rear Panel
00 = None
01 = Perforated Covers
02 = Solid Rear Panel
03 = Both 01 and 02
05 = Solid Covers
Note : mm Dimension indicates subrack is set to accept noted mm depth cards and inches dimension is overall subrack depth
9U
84 = 160mm; 9.75"
85 = 160mm; 11.15"
86 = 220mm; 12.00"
87 = 280mm; 15.00"
88 = 340mm; 18.00"
89 = 400mm; 20.00"
Depth
3U
72 = 160mm; 9.75"
73 = 160mm; 11.15"
74 = 220mm; 12.00"
75 = 280mm; 15.00"
76 = 340mm; 18.00"
77 = 400mm; 20.00"
Rear Horizontal Extrusion rail for backplane attachment
CCX
Model Numbers
CCA = Assembled
CCK = Unassembled Kit
Subracks can be ordered assembled or as kit form. First choose from either an IEEE 1101.1(IEC60297) or an IEEE 1101.10 subrack. IEEE 1101.10 version includes an injector/extractor type front extrusion with 10mm extended lip versus IEEE 1101.1 version includes front extrusion with 2.5mm short lip.
Subrack assembly or kit includes side panels, front extrusions, rear extrusions, M2.5 tapped nutstrips, insulator strips, rack flanges and mounting hardware. Card guides are sold separately.
XX
Covers/Rear Panel
00 = None
01 = Perforated Covers
02 = Solid Rear Panel
03 = Both 01 and 02
05 = Solid Covers
XX
Inside Width (Does not includes Flanges)
36 = 36HP (7.4" rail length)
44 = 44HP (9.0" rail length)
64 = 64HP (13.0" rail length)
84 = 84HP (17.0" rail length)
Ordering Info for IEEE 1101.1 style subracks
Depth
3U
60 = 160mm; 9.75"
61 = 160mm; 11.15"
62 = 220mm; 12.00"
63 = 280mm; 15.00"
64 = 340mm; 18.00"
65 = 400mm; 20.00"