Backplane No. of Slots
08 = 8-slots, 6.35"W
10 = 10-slots, 7.95"W
12 = 12-slots, 9.55"W
16 = 16-slots, 12.75"W
20 = 20-slots, 15.95"W
21 = 21-slots, 16.75"W
Vector offers a comprehensive range of VMEbus backplanes from 2 to 21 slots. VME J1/J2 and VME64x J1/J2/P0 backplanes per ANSI/VITA 1.1-1997. Monolithic 6U high VME64 and VME64x backplanes are fully RoHS compliant and perform to ANSI/VITA 1.7-2003 (R2009) increased current level for VME (96 pin) and VME64x (160 pin) DIN/IEC connectors. VME64x incorporates a 5 row, 160 pin DIN connector which provides extra I/O and signal lines but also backward compatibility with traditional VMEbus systems that uses 96 pin DIN connectors. Both VME64 and VME64x backplanes are 6U high are an easy replacement or addition to any 6U subrack system.
X
E
(VME64x backplane, 2-slots)
VMEBP07P00 Rear View
P
Backplane No. of Slots
02 = 2-slots, 1.55"W
03 = 3-slots, 2.35"W
04 = 4-slots, 3.15"W
05 = 5-slots, 3.95"W
06 = 6-slots, 4.75"W
07 = 7-slots, 5.55"W
Backplane Type
BP = VME J1/J2, Standard
64 = VME64x, J1, J2, P0
VME64E21P01 Front View
■ VME64, VME64x Backplane Specification : ANSI / VITA 1.1-1997
■ Compliant to : ANSI / VITA 1.7-2003 (R2009)
■ Greater than 64MHz high speed design
■ Shielded signal lines & Controlled Imepedence
■ Active Electronic Bus Grant & IACK Daisy chaining
■ Screw Terminals (Power Bugs) for power input
■ On board termination
■ Surface mount / pressfit technology
■ Available in 2, 3, 4, 5, 6, 7, 8, 10, 12, 16, 20 or 21 Slots
BP
(VME64 backplane, 7-slots)
Our standard VMEbus type VME64 and VME64x backplane configurations can be ordered using the chart below, however Vector can custom configure any of our backplanes to suit your specific needs. Contact inquire@vectorelect.com for more information.
Standard backplanes include on-board termination and electronic daisy chaining(EBG) with OR-logic integrated into the backplane.
Order "VMEBP" for VME J1/J2, 96-pin DIN connectors or "VME64" for VME64x J1/J2/P0, 160-pin J1/J2 DIN and 133-pin P0 connectors.
Conformal coating available and is MIL-I-46058C and IPC-CC-830 qualified and U.L. recognized.
VME64E02P01 Front View
Auto Jumper
E = EBG
(Electronic Bus Grant)
■ Material : 12-layer FR-4 Epoxy Glass construction
■ PCB UL94-V0, RoHS compliant
■ PCB copper areas plated with Immersion gold
P0 connector
0 = Not installed
1 = Installed on all slots
VME
Downloads
(VME64x backplane, 21-slots)
■ 6U Board Height = 10.317" (262.05mm)
■ 4.05mm thick PCB eliminates need for backplane stiffner rail
■ SMT / Press-fit assembly
■ Connector pitch : 4HP (0.800")
■ Board Width = 0.745" + ([N-1] x 0.80") inches
"N" = number of slots
0.745" = sum of overhang @ either end of backplane
Board specifications
Accessories
Conformal Coating
0 = Without
C = With conformal coating
XX
Mechanical specifications
Ordering Info
X